Next Login
Professional Audio
AP 502
51EAP502
2 CH
ClaseAB
Audio Amplifier.
AP 502 is a professional amplifier for low impedance installations. Thus, it can be operated with 4-ohm and 8-ohm loudspeaker systems as well as in bridge mode. It has a stereo/bridge mode selector switch and a floating ground switch to prevent noise caused by grounding other devices. Each channel has balanced/unbalanced inputs via XLR3 and RCA connectors. For the output there are also double connections, Speakon and Binding Post in this case. They are equipped with short-circuit and DC output protection, overtemperature and limiter protection as well as a soft start function. The 2 HU 19" size allows several units to be placed in a transport rack.
Features
- Stereo / Bridge modes.
- Soft Start function.
- On, clip and protection indicator LEDs.
- 2 19-inch rack units.
| No. Channels | 2 |
| W/Ch @ 8 Ohm | 300 W/ 300W+300W |
| W/Ch @ 4 Ohm | 450 W/ 450W+450W |
| W Bridge @ 8 Ohm | 900 W/ 900W |
| Frequency Range | 20Hz - 20 kHz ±1.5dB/ 20Hz - 20 kHz ±1.5dB |
| THD+N | 0.1% |
| Slew Rate | 30V/uS |
| S/N Rate | 95 dBA |
| Damping Factor | >200 (5Hz-1kHz) |
| Dynamic Range | >80 dB |
| Gain | 26 dB |
| Input Impedance | 20 KOhm (balanced) / 10 KOhm (unbalanced) |
| Input Sensitivity | 1V |
| Connections | XNL4/Binding post (Output) XLR3p male/RCA (input) |
| Protections | Soft start, DC, VHF, Short circuit, Limiter, overheat |
| Length(m) | Width(m) | Height(m) | Weight(kg) | |
|---|---|---|---|---|
| Product | 0.35 | 0.48 | 0.09 | 11.50 |
| Box | 0.44 | 0.55 | 0.14 | 11.40 |
So far, there are no questions related to this product.
Register to be able to ask a question about this product.
